How To Clean Euhomy Ice Maker

By clicking on the product links in this article, Sleepingvibe may receive a commission fee to support our work. See our Affiliate Disclosure.

Follow the instructions below to clean your Euhomy Ice Maker:

Cleaning The Removable Parts

Before you clean your Euhomy ice maker, turn off the power. Remove all the removable parts. Pull out the ice tray or basket. Wash the removable parts using hot soapy water. Rinse well and let dry.

When cleaning the condenser of your Euhomy ice maker, be careful not to cut yourself as the edges can be sharp. It’s best to use a brush or vacuum cleaner with a brush to clean this part.

Cleaning The Inside

Using a soft cloth, wipe down the inside of your ice maker with the hot soapy water. But, if there is lime, mold, or other debris, you can use a water solution with two tablespoons of white vinegar.

Clean Hard To Reach Areas

You can use a pump to splash cleaning solutions into the crevices for nooks and crannies that are hard to reach. Likewise, you can use a thin, long brush to get into small spaces.

Check All The Components

Once you clean all the parts of your Euhomy Ice Maker, check that you have all the pieces. Reassemble each part one at a time. Make sure that each part is in the correct place. After reassembly, run the ice maker for two cycles to ensure it works correctly. Ice cubes should be clear, without any odor.

Euhomy Ice Maker Self-cleaning Instructions

Press and hold the timer button for five seconds to use the self-cleaning mode on your Euhomy Ice Maker. A 20-minute self-cleaning cycle will start.

For this to work, you should own a self-cleaning Euhomy Ice Maker like this or this one. For other troubleshooting tips, read our Euhomy Ice Maker Troubleshooting Guide. And be sure to check out this list of the top ice makers you can buy.

Paul Wade
About the author

Paul Wade

I’m Paul, and I founded Ice Maker Basics with my friends. We are dedicated to good drinking with ice and great living.
Related Topics

Leave a Comment